With the cover removed, press the PROGRAM button.

1. After entering the program mode, move the cursor under “YEAR, MONTH, DATE".
2. Press ENTER to start the sequence.
3. The year will begin to flash. Press the CHANGE button until the desired year appears in the display,
then press ENTER.
4. The month will start flashing. Press the CHANGE button until the desired month appears in the
display, then press ENTER.
5. The date will start flashing. Press the CHANGE button until the desired date appears in the display,
then press ENTER.
6. The entire display will begin flashing. If the year, month and date are correct, press ENTER. If not,
press the CHANGE button and return to Step #3.
1. After entering the program mode, move the cursor under “HOUR, MINUTE".
2. Press ENTER to start the sequence.
3. The hour will begin to flash. Press the CHANGE button until the correct hour appears in the display,
then press ENTER.
4. The minutes will start flashing. Press the CHANGE button until the correct minutes appear in the
display, then press ENTER.
5. The entire display will begin flashing. If correct, press ENTER. If not, press the CHANGE button and
return to Step #3.

With the cover removed, press the PROGRAM button.

1. After entering the program mode, move the cursor under “BEGIN DAYLIGHT SAVING”. The cursor
may be moved by selecting the CHANGE button.
2. Press ENTER.
3. The year will begin to flash. Press the CHANGE button until the correct year appears in the display,
then press ENTER.
4. The month will start flashing. Press the CHANGE button until the correct month appears in the display,
then press ENTER.
5. The date will start flashing. Press the CHANGE button until the correct date appears in the display,
then press ENTER.
6. The entire display will begin flashing. If the year, month and date are correct, press ENTER. If not,
press the CHANGE button and return to Step #3.

With the cover removed, press the PROGRAM button.

1. After entering the program mode, move the cursor under “END DAYLIGHT SAVING”. The cursor
may be moved by selecting the CHANGE button.
2. Press ENTER.
3. Press the CHANGE button until the correct year appears in the display, then press ENTER.
4. The month will start flashing. Press the CHANGE button until the correct month appears in the display,
then press ENTER.
5. The date will start flashing. Press the CHANGE button until the correct date appears in the display,
then press ENTER.
6. The entire display will begin flashing. If the year, month and date are correct, press ENTER. If not,
press the CHANGE button and return to Step #3.